Datapath VQS-01 User Manual

1 24/02/2011 VQS-01 User Manual Datapath LimitedAlfreton Road,Derby, DE2

10 24/02/2011 Setting up the VQS-01  Ensure the power supply for the PC is disconnected.  Connect the

11 24/02/2011 The LED’s on the front panel will indicate analog VGA or DVI input as follows: Indicates

12 24/02/2011 Operating Instructions VGA Analog Input Mode When the VQS-01 is powered up successfully and

13 24/02/2011 Contrast Using the + and - buttons the image contrast can be adjusted. It is possible to

14 24/02/2011 For illustration purposes the LED panel is indicating that a DVI source is connected i.e. t

15 24/02/2011 Output Refresh Rates The Output Refresh Rate mode enables the user to change the current re

16 24/02/2011 70Hz 72Hz 75Hz 85Hz Flip Image Output The Flip Image Output option enables the user to

17 24/02/2011 Selecting this series of LED’s and using the + and - buttons will flip the image displayed

18 24/02/2011 Multiple VQS-01 Units If multiple VQS-01 units are being used to create a larger display wa

19 24/02/2011 Resetting the VQS-01 Factory default Settings The VQS-01 is shipped with a default setting

2 24/02/2011 Contents FCC Compliance ...

20 24/02/2011 Resolution Tables VESA Modes Supported by VQS-01 Input Resolution Output Resolution 720 x

21 24/02/2011 Custom Modes Supported by VQS-01 (Requires customized input mode with specific timing info

22 24/02/2011 Using VQS-01 with other Datapath Products Up to four VQS-01 controllers can be used with a

23 24/02/2011 Specification VQS-01 Physical Dimensions 248 x 175 x 55mm Operating Temperature Range 0 -

24 24/02/2011 Datapath Limited Datapath has a long and very successful history in the computer graphics i

25 24/02/2011 UK Headquarters and Main Sales Office Datapath Limited Alfreton Road Derby, DE21 4AD Tel:

26 24/02/2011 Index 2 x 2 format, 6 Adjustment Buttons, 8 Brightness, 12 change the mode, 13 Clock Phase

27 24/02/2011 Output Refresh Rate, 14 Output Resolution, 20 output sockets, 10 Output Sockets, 8 packing

28 24/02/2011

3 24/02/2011 FCC Compliance Federal Communications Commission Statement This device complies with FCC Ru

4 24/02/2011 Declaration of Conformity - FCC DECLARATION OF CONFORMITY Per FCC Part 2 Section “. 1077(a)

5 24/02/2011 Declaration of Conformity - CE Per EN55022 Responsible Party Name: Datapath Limited Addre

6 24/02/2011 Introduction The Datapath VQS-01 is a display wall controller that connects to the VGA outp

7 24/02/2011 Unpacking Your packing box should contain the following items:  The VQS-01 Display Wall Co

8 24/02/2011 Description Front Panel The front panel is made up of 3 specific areas:  The LED panel. 

9 24/02/2011 Sync Sockets The Sync sockets are used when multiple VQS-01’s are connected together and it