ImageDP4User ManualVersion 01.06
Installing the Display Drivers Once the ImageDP4 card has been installed and the boot messages are appearing on the correct monitor, you can start Win
ImageDP4 Video BIOSThe Intel x86 based architecture limits the amount of legacy I/O space available in a system to 64KB. Hardware which requires I/O
Connecting up to 64 Screens To connect up to 64 screens to ImageDP4 cards, congure the links as shown in the diagram below:The links control the orde
The Windows desktop should appear on the four screens attached to the rst card as it did after the display driver had been installed for the rst Im
Multi Screen Conguration To change the display settings for the ImageDP4 cards, use the Display Properties dialog in the Control Panel. If you have m
Resolution per Screen:Note:Changing the resolution may alter the colour palette settings, so check that it is correct before clicking OK or Apply.Colo
When the TWIN tab is selected, the display driver reads the EDID information from each monitor and reads the Registry to nd detailed display timing i
Prune ModesEnabling this check box limits the resolutions displayed in the resolution box to those that are supported by all of the screens attached
Datapath LimitedDatapath has a long and very successful history in the computer graphics industry. Datapath has been designing and supplying high per
UK Headquarters and Main Sales OfceDatapath Ltd., Bemrose House,Bemrose Park,Wayzgoose Drive Derby, DE21 6, UKTel: +44 (0) 1332 294441 Fax: +44 (0) 1
ContentsDECLARATION OF CONFORMITY...4Safety Instructions...
Appendix 1 - Dening Custom ModesDening custom modes is carried out using the Custom Mode Utilities tool that can be found on the Datapath CD. The
Appendix 2 - Screen OrderConnection of ScreensThe rst card to be initialized generates the picture for the top left monitor in the wall of screens, p
IndexAAdditional ImageDP4 Cards 10BBoot the system 10CCables 5Card format 6Card Ordering 12Card size 6Changing the Order of the Screens 21Colou
FCC Compliance ImageDP4Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the following
DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here
Safety InstructionsTo prevent damage to your Datapath product or injury to personnel operating the equipment, please read the following safety precaut
IntroductionThe ImageDP4 is based upon a single, powerful graphics processor that is complemented by faster memory and higher pixel transfer bandwidth
ImageDP4The ImageDP4 PCI Express graphics card supports the display of digital video capture windows. It is ideal for high end video/data walls, signa
Hardware InstallationThis section deals with installing ImageDP4 cards and spreading the Windows desktop across all the screens. If you are intending
Installing the ImageDP4It is recommended that all ImageDP4 cards and any Vision cards are installed in the system prior to installing the drivers. O
Comments to this Manuals