User ManualVersion 1.0.0The VisionAV-HD Audio/Video Capture Card
DirectShowIf you change the link ordering after installation you must run dplinks.exe. This program will update the existing input names used by the
Application OverviewThe application displays the connected source in a window; it has the following features:• Scales the data to t in the window•
Datapath LimitedDatapath has a long and very successful history in the computer graphics industry. Datapath has been designing and supplying high per
FirmwareUpgrades-VisionRGB-E29HHDMI5HDMICapture3HDMIinput6HelpFile9IInputSources5InstallingtheCaptureCard5InstallingtheVisio
Ssoftware9StandardDenition6StandardDenitioninput6StorageTemperature4TTechnicalSupport11UUnbalancedInput7UnbalancedRCA2Unpacking
ContentsIntroduction...1Dual Channel Video...
IntroductionThe VisionAV-HD has three independent video capture channels – two supporting HD capture and decoding Standard Denition composite video.
Hardware OverviewDual Channel Video• Channel 1: Digital or Analog HD Video• Channel 2: Composite VideoFlexible Audio Capture• Balanced (XLR) and U
Board Format PCI-Express x4 low prole card, 68.9mm x 167.6mmConnectors (main board) 2 x DVI-I and a single RCA (female)HDMI Capture Supports HDMI 1.
Operating Temperature 0 to 35 ºC ( 32 to 96ºF)Storage Temperature -20 to 70 ºC ( -4 to 158ºF)Relative Humidity 5% to 90% non-condensingWarranty 3 year
Installing the Capture CardYou are likely to need a at blade and /or a cross head screwdriver for the installation of the VisionAV-HD card; it would
6An HDMI input is connected to the DVI-I connector using the supplied DVI-HDMI Adapter:A Component input is connected to the DVI-I connector using the
Audio is connected to the AM2 using the Audio Break Out cable provided with the AM2:1 Balanced (XLR) Input Left2 Balanced (XLR) Input Right3 Unbalanc
Installing Multiple CardsMultiple cards can be installed in a system providing a large number capture channels. Combinations of Vision capture cards i
Comments to this Manuals